Book a 30-minute diagnostic ↗

industry · Pan-India

Robotics and drone supply chains, documented part by part.

Supply chains outside China for robotics, drone and dual-use hardware: BOM origin mapping and Indian suppliers for metal and harness parts.

Book a diagnostic

Where we work

Capability on the ground, across India.

Clusters are indicative. Every supplier is qualified against the actual requirement.

India operating clusters for Robotics and drone supply chains, documented part by part.
Locations shown
  • Noida - Delhi NCR
  • Pune
  • Hyderabad
  • Bengaluru
  • Chennai
  • Coimbatore
Boundary: Survey of India. Clusters indicative; map not to scale.

Robotics and drone companies are held back less by software than by the supply chain behind it, and buyers increasingly require parts made outside China. BCube plans where each subsystem should be made, qualifies Indian suppliers for the parts India does well (structures, machined, cast and fabricated parts, enclosures and harnesses) and documents the origin of every part.

Book a 30-minute India sourcing diagnostic

Part-by-part origin map for every BOM. · A straight answer when a part should not come from India.

Who this is for

Founders and operations leads at robotics, physical AI, drone and defence-tech companies in the US, Europe and Australia, from the first pilot build to the first production run.

Why now

The US Drone Dominance Program tightens its rules on covered-country content in phases, with new minimums in February and August 2027. China has paused only part of its rare-earth export controls, until 10 January 2027. An ARC Advisory Group panel at Automate 2026 found supply chain constraints, not software, increasingly limit robotics scale-up. Last verified 13 November 2026.

What usually goes wrong

What you see What is usually behind it
Prototype parts nobody can reproduce at volume Parts made one at a time without drawings, fixtures or a process
A 20-week lead time on a replacement drive or sensor Single-source, concentrated supply
A BOM costed at prototype prices No landed production cost by geography
A customer asks where every part was made No origin records below tier 1

Recognise two or more of these? Book a 30-minute diagnostic and we will tell you where the gap is. Book a diagnostic

What we do

Where we work

Bengaluru and Hyderabad (electronics, drones, aerospace), Pune (machining, automation), Noida and Delhi NCR (electronics), Coimbatore (precision parts), Chennai (machining, electronics manufacturing). Clusters are indicative; we qualify suppliers wherever the capability is. Map boundary: Survey of India.

What we inspect

First articles for machined and moulded parts · harness and board-assembly workmanship · sub-tier supplier origin · materials.

Compliance we help evidence

NDAA sections 848 and 889, Blue UAS and Drone Dominance documentation (US) · export-control awareness (ITAR and EAR) with your advisers.

Proof

From the floor: “Most robot programmes don’t stall on the model. They stall on a drive with a 20-week lead time, or a bracket nobody can make twice the same way.” Ram Raghuraman

What India can and cannot supply today

Subsystem Share of a humanoid’s bill of materials Fit for India
Actuators (motors, gearboxes, drives) 40-60% Housings and machined parts: strong. Strain-wave drives and roller screws: few suppliers worldwide; dual-source
Sensing and perception 10-20% Mostly imported; supplier map and risk plan
Compute and control 10-15% Board assembly and test: possible. Chips: imported
Structure (frames, housings, enclosures) 5-10% Strong: machining, casting, fabrication and finishing
Battery packs 5-10% Pack structure and assembly: feasible. Cells: imported

Shares are ranges from McKinsey’s analysis of humanoid supply chain constraints.

Related: Move Sourcing to India · Electrical & Power Equipment · Whitepaper: From Prototype to Production

Send us your BOM. We’ll map where each part should be made.

Free. No obligation. A written summary within two business days.

Book a 30-minute India sourcing diagnostic

You speak with me, not a salesperson.

Questions

Straight answers.

Can India build a humanoid robot or drone end to end today?

Not at volume. Indian makers still import key components such as microcontrollers, cameras, magnets and some drives. India's strongest offer is structures, machined, cast and fabricated parts, enclosures and assemblies, and we plan around that.

Which parts should come from India?

Usually the metal, mechanical and custom parts: frames, housings, brackets, enclosures, castings and harness assemblies. Strain-wave drives, roller screws, magnets and force sensors have concentrated supply, so we plan dual sources.

Do you work with early-stage startups?

Yes. Early work is usually strategy and costing, and India execution follows only if the numbers support it.

Free 30-minute call

Bring the sourcing problem. We’ll tell you where the gap is.

No obligation. A short written summary within two business days — and you speak with Ram, not a salesperson.

Book your India sourcing call

Privacy controls