Book a 30-minute diagnostic ↗

service · Pan-India

Quality assurance in India: defects caught at the factory.

A quality system inside your Indian supplier: specs, quality guide, first article, in-process checks, pre-shipment inspection, verified fixes.

Book a diagnostic

Label: Capability · Quality

BCube puts a quality system inside your Indian supplier: written specifications and tolerances, a supplier quality guide, first-article sign-off, in-process checks, pre-shipment inspection and corrective actions closed on site. It is delivered inside a programme or your India Desk, not as one-off inspections.

Book a 30-minute India sourcing diagnostic

Result · Modern Matter: 25-30% → under 2%. Defect rate at Indian suppliers after specs, jigs and fixtures and pre-shipment audits. Read the case Typical outcomes; results vary with the starting point.

Who this is for

Importers and manufacturers buying from India whose defects are found too late, at receiving or by their own customers. Usually $10M-500M in revenue, buying through a trader or directly, with no quality engineer on the ground.

What usually goes wrong

What you see What is usually behind it
Defects found after the container lands No written defect definition; inspection only at the end, if at all
Good samples, poor production No first-article sign-off on the production line
The same defect keeps coming back Corrective action agreed by email, never verified on site
Dimensions drift between batches Drawings in inches for workshops that work in millimetres; no jigs or fixtures

Recognise two or more of these? Book a 30-minute diagnostic and we’ll tell you where the gap is. Book a diagnostic

A quality system, not a checklist

  1. Specifications and tolerances. Drawings for every SKU, converted to metric, with what counts as a defect
  2. Supplier quality guide. One document the factory works to, with photos of good and bad
  3. First-article sign-off. Production parts approved before volume runs
  4. Jigs and fixtures. Worked out with the supplier so common errors cannot happen
  5. In-process checks. Inspections during production, not only at the end
  6. Pre-shipment inspection. AQL sampling, defects classed critical, major or minor (QC Report template)
  7. Corrective actions closed. Owner, date and on-site verification in one log (Production Update template)

Proof

From the floor: “The factories weren’t careless. Nobody had ever told them what good looked like. We fixed the inputs, not just the inspection.” Ram Raghuraman

“Quality inspections, training, factory prospecting, and personal communication, weekly and sometimes daily.” Clingmans Corporation

Photo: measurement or in-process check at a supplier.

How you get it

Runs inside a programme ($10,000-35,000) or your India Desk (from $4,500 a month, 3-month minimum). Most clients start with a Sourcing Assessment ($3,000-7,500).

We don’t take inspection-only work. See engagements & investment

Related: Fix Your India Sourcing · Toolkit: QC Report · Home Hardware, Decor & Lighting · Castings, Forgings & Machined Components

Send us your last three quality complaints. We’ll tell you where the system is breaking.

Free. No obligation. A written summary within two business days.

Book a 30-minute India sourcing diagnostic

You speak with me, not a salesperson.

Questions

Straight answers.

Can Indian suppliers match Chinese quality?

For most metal, engineered and home products, yes, once the specification, first-article sign-off and in-process checks are in place. Where a part needs a process India doesn't do well at your volume, we tell you.

What AQL level should we use?

Most consumer and hardware goods use General Inspection Level II with AQL 0 for critical, 2.5 for major and 4.0 for minor defects. We set it with you per product and risk.

Do we have to change suppliers?

Usually not. Most quality problems are fixed at the current factory.

Do you do one-off inspections?

No. Inspections run inside a programme or your India Desk, where we can also fix what we find.

Free 30-minute call

Bring the sourcing problem. We’ll tell you where the gap is.

No obligation. A short written summary within two business days — and you speak with Ram, not a salesperson.

Book your India sourcing call

Privacy controls